Rinnai Bathroom Water Controllers
Universal Controller
Get the most out of your Rinnai INFINITY with our water controllers.
Say goodbye to temperature fluctuations. Simply set the water controller at your desired temperature, and then turn on the hot tap. There’s no need to add any cold water to achieve your desired temperature. Let the Infinity’s do all the adjusting for you.
Why install Water Controllers?
Rinnai strongly recommend installing Controllers to allow you to take full advantage of all the
benefits available. Water controllers, depending on the model selected, enable the following
additional benefits with any Continuous Flow model with the exception of Solar boost units:
Rinnai Controller Model No : MC-601-A
Digital controllers allow you to select the exact temperature of the hot water at the tap within the controller temperature range. This has a number of benefits:
- Safety, especially if you have young children, the hot water can be pre-set to a child-safe level.
- No need to mix hot and cold water, this reduces the affect of temperature spiking when another tap in the building is turned on.
- You use your continuous flow unit more efficiently as less gas is required to heat water to 40 °C (typical shower temperature) than at 55 °C (default temperature without controllers).
- Allows diagnosis of problems (such as gas supply disruption) in the unilikely event or a fault, or for a maintenance review when the INFINITY is serviced
Water Controllers Limitations
An installation can have up to 4 universal MC-601 water controllers.
Deluxe kitchen, bathroom and wireless water controllers are also available and various combinations of universal
and the deluxe and wireless controllers can be used with the following limitations:
• A maximum of 4 water controllers can be fitted Any combination of delux and universal water controllers can be used with the following limitations:
• Only ONE master controller can be installed. This can be a deluxe kitchen, wireless or universal water
controller (when programmed as a master controller).
The MC-601 is compatible with the following other Rinnai water controllers:
Universal (Compact), Kitchen & Bathroom Deluxe, and Wireless Controllers.
Temperature Control
Water controllers allow precise temperature control by the user. When used correctly, the hot water unit will deliver
Only one MC model water controller can be designated as a ‘Master’ water controller and this is normally used
in the kitchen. All the remaining water controllers are designated as ‘Sub’ water controllers and are for use in
bathrooms, toilets and laundries. The maximum temperature limit for all ‘Sub’ water controllers is restricted to
50°C* to minimise the risk of burns in these areas.
Each water controller can be individually programmed, however the water heater can only deliver one set
temperature at any time. The available temperatures (°C) are as follows:
Water Controller
Temperatures (°C)
Master (MC) 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 48, 50, 55* 60*, 65*, 70*, 75*
Sub (MC or BC)
however maintaining lower temperatures also helps to save energy.
Suggested
Temperature Shower 37°C ~ 43°C
To obtain water temperatures lower than 37°C, simply open the cold water tap add cold water until the desired
lower temperature is reached.
NOTE
* Temperature may not be available on all installations. Some Rinnai Continuous Flow water
heaters can be programmed to deliver higher temperatures from the master water controller.
Rinnai Continuous Flow water heaters may also be programmed to restrict the maximum delivery
temperatures to 40, 42, 50, 55, 60, & 65°C. Contact Rinnai for more details.
Please Fill out your Details And We Will Send You A Price On RINNAI Controller MC601
Rinnai Remote Controller Model No : MC-503RC
Available Controller Configurations
Wireless only installations:
A maximum of 4 wireless controllers with 1 programmed as the master controller.
Wired and wireless installations:
A maximum of 4 water controllers can be fitted in combination and used as follows:
Only 1 master controller can be installed, this can be a:
∙ MC-100V Kitchen Deluxe (will always function as a master controller if fitted)
∙ MC-91 Compact (also called Universal)
∙ MC-503RC Wireless
Up to 2 BC-100V (Bathroom Deluxe) water controllers can be fitted
A MC-503RC or MC-91 must be the fourth water controller in any installation.
When installing combinations of both wired and wireless controllers, all wired water controllers
must be connected BEFORE the wireless water controllers are assigned to a transceiver channel.
Wired controllers can only be added to an existing wireless installation when all wireless
transceiver channels have been unassigned and all wireless controllers have been reset.
Water resistance
The MC-503RC Wireless Water Controller is a water resistant device, however excessive
exposure to water may result in damage to the controller.
Do not immerse the controller in water
Avoid direct exposure to water or steam as these conditions may cause a malfunction
Always avoid exposure to water when the battery compartment is open.
When cleaning your controller use only a damp cloth and mild detergent.
Please Fill out your Details And We Will Send You A Price On PRICE ON THE RINNAI Remote Controller MC-503RC
Rinnai Controller Bathroom Model No : BC-100V-1A-1W
Rinnai Remote Controller Model No: BC-100V-1A-1W
Please Fill out your Details And We Will Send You A Price Rinnai Remote Controller Model No: BC-100V-1A-1W
Rinnai Controller Model No: MC-100V-1A-1W
Please Fill out your Details And We Will Send You A Price Rinnai Controller Model No: MC-100V-1A-1W
Remote water controllers allow precise temperature control by the user. When used correctly, the hot
water unit will deliver the selected temperature, even when the water flow is varied, or more than one
tap is in use.
Each water controller can be individually programmed, however the water heater can
only deliver one set temperature at any time. The available temperatures (°C) are as follows:
Kitchen Controller:
37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 48, 50, 55°C* ( 60, 65°C HD models only )
Bathroom Controller:
Hot Water Delivery: 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 48, 50°C
Bath fill Delivery: 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48°C
Whilst hot water outlets are open the set temperature may be lowered. However the set temperature
cannot then be raised above 43°C.
In addition, transfer of ‘priority’ between water controllers is not
possible.
These are safety features.
Suggested temperatures are:
Kitchen 50°C ~ 55°C* Shower 37°C ~ 43°C, Bath fill 39°C ~ 45°C
* Temperature may not be available on all installations.
Rinnai water heaters can be programmed to deliver higher temperatures
via the kitchen water controller.
Contact Rinnai for more details.
These temperatures are suggestions only.
You may find higher or lower temperatures more
comfortable.
Maintaining lower temperatures helps save energy.
To obtain water temperatures lower
than 37°C simply add cold water.
Water controllers are an optional extra.
‘Universal’ and ‘Deluxe’ water controllers can be fitted.
Universal water controllers allow temperature selection only. Deluxe water controllers allow
temperature selection, shower saver / bath fill and have a clock function.
Water controllers allow the water temperature to be set from the various locations where they are
installed.
The temperature selected will be available to all outlets.
Universal (MC-91Q) and Deluxe (MC/BC-100V) Water Controllers – available configurations:
All Models
A maximum of 4 water controllers can be fitted.
Any combination of both deluxe and
universal controllers can be used with the following provisions:
# Only ONE MC-100V water controller can be installed.
# Up to TWO BC-100V water controllers can be installed.
# The FOURTH water controllers in any installation MUST BE a MC-91Q.
Please Note Price Quote For Appliances / Equipment/Models are subject to change without notice. Models are subject to change in respect to size,colour,dimentions, & features without notice. Please check befor making your final order with supplier on above points.