Rinnai Smartstart® Water Saver
Save water from going to waste.
The Rinnai Smartstart® Water Saver has been developed to specifically reduce water wastage whenever a hot tap is turned on.
Rinnai Smartstart Water Saver
Benefits & Features
- Allows you to pre-heat the water in the pipes before you turn on the hot tap
- Simply activated by the 'preheat' button on any Water Controller
- Takes a minute or two to warm up depending on the size of your home
- Saves literally tens of thousands of litres of water over the life of your hot water system
- Plumbing is designed as a 'ring-main' or loop around the house. In existing homes, a return line can be plumbed in from the furthest point back to the INFINITY
The Smartstart® system heats the water in the pipework water connected between the water heater and the hot water outlets before any outlets are opened using the ‘flow and return’ pipework principle. This results in water savings and reduced waiting time for heated water delivery from the outlet when opened.
Traditional ‘flow and return’ systems usually keep the water in the pipework heated continuously. The Smartstart® system however, only heats the water before the outlet is opened. This results in significant energy savings because water is not heated unnecessarily whilst retaining the benefits of traditional flow and return systems.
The Smartstart® module is usually located below the Rinnai Continuous Flow water heater, however, it can be mounted anywhere within the return loop.
H: 26 W: 22 D: 22.9
Smartstart® Water Saver
Benefits & Features
- Allows you to pre-heat the water in the pipes before you turn on the hot tap
- Simply activated by the 'preheat' button on any Water Controller
- Takes a minute or two to warm up depending on the size of your home
- Saves literally tens of thousands of litres of water over the life of your hot water system
- Plumbing is designed as a 'ring-main' or loop around the house. In existing homes, a return line can be plumbed in from the furthest point back to the INFINITY