Gas Geysers – Troubleshooting for Standard Atlas Gas Geysers
We’ll fix it for you:
Call us on 083 592 5450 to book a technician
When troubleshooting a standard gas geyser , primary checks include verifying the gas supply (cylinder not empty, regulator functioning), checking for a clogged pilot light or thermocouple, inspecting the gas line for leaks, ensuring proper water pressure, and examining the thermostat settings; if the issue persists, it’s best to contact a qualified Gas Installer.
We’ll fix it for you:
Call us on 083 592 5450 to book a technician
Common Issues and Troubleshooting Steps:
-
No Hot Water:
- Gas Supply:
- Check if the gas cylinder is empty.
- Inspect the gas regulator for damage or expiry.
- Ensure the gas line is properly connected and not leaking.
- Check if the gas cylinder is empty.
- Pilot Light:
- Check if the pilot light is lit.
- Clean the pilot light orifice if clogged.
- Adjust the flame if too low.
- Check if the pilot light is lit.
- Gas Supply:
Common Issues and Troubleshooting Steps:
-
No Hot Water:
- Gas Supply:
- Check if the gas cylinder is empty.
- Inspect the gas regulator for damage or expiry.
- Ensure the gas line is properly connected and not leaking.
- Check if the gas cylinder is empty.
- Pilot Light:
- Check if the pilot light is lit.
- Clean the pilot light orifice if clogged.
- Adjust the flame if too low.
- Check if the pilot light is lit.
- Thermocouple:
- Verify the thermocouple is securely seated and functioning properly.
- Clean the thermocouple if dirty.
- Verify the thermocouple is securely seated and functioning properly.
- Gas Supply:
-
Erratic Hot Water Temperature:
- Thermostat Settings:
- Check the thermostat setting and adjust as needed.
- Check the thermostat setting and adjust as needed.
- Water Pressure:
- Ensure adequate water pressure is available.
- Ensure adequate water pressure is available.
- Sediment Buildup:
- Flush the water system to remove sediment build-up.
- Flush the water system to remove sediment build-up.
- Thermostat Settings:
-
Geyser Frequently Switches Off:
- Gas Pressure:
- Check for low gas pressure from the cylinder.
- Check for low gas pressure from the cylinder.
- Water Flow:
- Verify sufficient water flow is present.
- Verify sufficient water flow is present.
- Safety Device:
- Check if the safety device is functioning correctly (may need professional attention).
- Check if the safety device is functioning correctly (may need professional attention).
- Gas Pressure:
Important Considerations:
-
Professional Assistance:
For complex issues like gas leaks, damaged internal components, or concerns regarding the safety device, always contact a qualified plumber.
-
Regular Servicing:
Schedule periodic maintenance to clean and inspect your gas geyser, ensuring optimal performance and safety.
-
Local Regulations:Be aware of local gas regulations and safety procedures when working with a gas geyser.